150W 6" Bench Grinder With Add-On Metal Polishing Kit + Flexi Drive Shaft 4" Mop

Bench Grinder Complete With An Add-On Metal Polishing Kit Suitable for polishing aluminium, steel, stainless steel, brass
As this machine has a small 150W motor it is suitable for light polishing work only eg craft work, model making, using light pressure. 
Please Note – The Main Image above shows the Polishing Kit Assembled to the Bench Grinder (shown on its own in another image) and also shows the Polishing Kit Component Parts Separately in the Same Image. The Bench Grinder and Polishing Kit are supplied separately. The buyer needs to Assemble the Polishing Kit to the Bench Grinder.Important : For Assembly Instructions and Kit Contents Please Read Below
The buyer needs to assemble the polishing kit. Tools required (not supplied) are a 19mm spanner and a Philips Screwdriver. See assembly below
1 x Toolstream (Silverline) 6" 150W (1/5hp) Bench Grinder  230v 2950 rpm. Electric Plug. Supplied fitted with a UK 3 Pin Electrical Plug. International buyers need to fit their own plug / adapter which is suitable for use in their own country. Comes fitted with 1 x 150mm Fine Grinding Wheel 1 x 150mm Medium Grinding Wheel
Please Note - the Motor will Run Hot. This is normal. The run time is around 10 minutes on, allow to cool, then continue. Do Not Push Hard against the polishing wheels. This will strain the motor. Using Light Pressure with the correct polishing procedures and this will get satisfactory results. The Toolstream / Silverline box which the bench grinder is supplied in may possibly be slightly damaged. It is only superficial damage which does not affect the machine. This is how they occasionally arrive with us and is something beyond our control.
Approximate length  Bench grinder with spindle adapters connected - 40cms. Longer with the flexible drive shaft attached.
Warranties Bench Grinder & Flexible Drive Shaft. The Buyer needs to register these online with Toolstream / Silverline for a 3 year warranty within 30 days of purchase. If not registered then only a 30 day warranty is offered. Further information is shown in the operator's manual supplied in the box with the machine. The Flexible Drive Shaft must NOT be over bent as this may permanently damage it, invalidating any warranty.
Safety - When polishing using the spindle adapters attached to the bench grinder, suitable safety glasses, gloves and dust mask (not supplied) must be worn
Scratch Removal - If there are scratches in the item surface then a series of abrasive discs / pads (eg 500 to 2000 Grit) may need to be used first prior to the polishing process.
Assembly - The Polishing Kit is supplied separately to the Bench Grinder and needs to be assembled / attached by the following method. 
Spindle Adapter Fitting Once the bench grinder side guards and the grinding wheels have been removed
please note that the left hand grinder shaft has a left hand nut), the mop spindle adapters are then slid over the grinder shafts. There is a right hand and a left hand spindle adapter in the kit. Please remove the grub screws in the adapters first and then fit the adapters as far as they will go onto the shaft. Once fitted, reinsert the grub screws (one in each adapter) and tighten them using your allen key (not supplied)
Polishing Add-On Kit Contents 2 x  Bench Grinder Spindle Adapters (1 x left and 1 x right - short versions) These are used to attach polishing mops to the bench grinder shafts. 1 x 4" x 1/2" Sisal Metal Polishing Wheel..  1 x 4" x 1/2" White Stitch Metal Polishing Wheel.  1 x 4" x 1/2" Loose Fold Polishing Wheel.
For use with the flexible drive shaft 1 x Set (50mm, 75mm and 100mm) Loose Fold Soft Cotton Polishing Mops + mandrel 1 x 100mm Cotton Polishing Mop 3 x Mounted Cotton Mops (1 each of cylinder, dome, goblet) - 6mm shank 4 x Felt Bobs (1 each of cylinder, conical, bullet, ball) - 6mm shank
1 x Silverline Flexible Drive Shaft - 1041 mm long. 6mm keyless chuck. The Flexible Drive Shaft must NOT be over bent as this may permanently damage it, invalidating any warranty. 1 x Flexible Drive Shaft Adapter - for attaching the flexible drive shaft to the bench grinder shaft. The adapter attaches the same way to the bench grinder shaft as the spindle adapters do.
Polishing Compound Bars – Weight Approx. 100gms – Dimensions - Approx. 85mm x 20mm x 27mm. see additional image 1 x Black Bar 1 x Green Bar 1 x White Bar 1 x Blue Bar 1 x Brown Bar 
1 x Cloth (colour may vary) 1 x Instructions
Shipping To - Northern Ireland, Channel Islands, Isle of Man, Isle of Wight,
and certain Scotland Post Codes (including some Aberdeenshire Post Codes) as can be seen listed below -
Please Note. The Free Post and Packaging to the above areas does not apply to this listing as the carriers charge a premium to deliver to those areas. Please kindly contact us for shipping rates which will be charged extra, prior to making your purchase.
UK Shipping
UK Areas and Post Codes Where Free Shipping Is Not Offered.  Please contact us for shipping rates.
Northern Ireland
Isle Of Man
Isle Of Wight
Channel Islands
And the following Scotland Post Codes AB31 to AB38 AB40 to AB56 HS IV1 to IV28 IV30 to IV32 IV36 to IV40 IV41 to IV49 IV51, IV55 & IV56 IV52 to IV54 IV63 KA27 and KA28 KW1 to KW14 KW17 to KW17 PA20 PA41 to PA49 PA21 to PA38 PA60 to PA78 PH4 to PH41 PH41 to PH42 PH49 to PH50 ZE
Large Parcels We send by overnight carrier and the consignment tracking number is uploaded to the buyer’s Ebay account. Please make sure there is somebody available to receive and sign for the consignment. The carrier will only attempt to deliver twice and if there is nobody there on both occasions the receiver will then have to collect from their local depot within 5 days.
International  Shipping We ship to eligible countries using Ebay’s Global Shipping Programme. Further details can be viewed at http://pages..co.uk/help/buy/shipping-globally.html